چراغ راهنمایی و رانندگی از دید arduino

در این مثال بنده از میکرو برای شبیه سازی چراغ راهنمایی و رانندگی استفاده کردم.

روند کار به این صورت بوده که ابتدا کتابخانه های مربوط به arduino را به محیط شبیه ساز proteus اضافه کردم. سپس در محیط ide کد مربوطه به زبان C++ را نوشته و خروجی hex گرفتم. سپس فایل generate شده را در محیط proteus بارگذاری کرده و سپس اجرا کردم.

کد مربوطه بصورت زیر میباشد:

//source code for Traffic Light written by Alireza Goshayesh.
const int red = 0;
const int yellow = 1;
const int green = 2;
const int a = 13;
const int b = 12;
const int c = 11;
const int d = 10;
const int e = 9;
const int f = 8;
const int g = 7;

void setup() {
pinMode(red, OUTPUT);
pinMode(yellow, OUTPUT);
pinMode(green, OUTPUT);
pinMode(a, OUTPUT);
pinMode(b, OUTPUT);
pinMode(c, OUTPUT);
pinMode(d, OUTPUT);
pinMode(e, OUTPUT);
pinMode(f, OUTPUT);
pinMode(g, OUTPUT);
}

void loop() {
makeRed();
count();
makeGreen();
count();
makeYellow();
delay(1000);
}
void makeRed() {
digitalWrite(red, HIGH);
digitalWrite(yellow, LOW);
digitalWrite(green, LOW);
}

void makeGreen() {
digitalWrite(red, LOW);
digitalWrite(green, HIGH);
}

void makeYellow() {
digitalWrite(green, LOW);
digitalWrite(yellow, HIGH);
}

void nine() {
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, LOW);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
delay(1000);
}

void eight() {
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
delay(1000);
}

void seven() {
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, LOW);
digitalWrite(f, LOW);
digitalWrite(g, LOW);
delay(1000);
}

void six() {
digitalWrite(a, HIGH);
digitalWrite(b, LOW);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
delay(1000);
}

void five() {
digitalWrite(a, HIGH);
digitalWrite(b, LOW);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, LOW);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
delay(1000);
}

void four() {
digitalWrite(a, LOW);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, LOW);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
delay(1000);
}

void three() {
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, LOW);
digitalWrite(f, LOW);
digitalWrite(g, HIGH);
delay(1000);
}

void two() {
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, LOW);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, LOW);
digitalWrite(g, HIGH);
delay(1000);
}

void one() {
digitalWrite(a, LOW);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, LOW);
digitalWrite(f, LOW);
digitalWrite(g, LOW);
delay(1000);
}

void zero() {
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, HIGH);
digitalWrite(g, LOW);
delay(1000);
}

void count() {
nine();
eight();
seven();
six();
five();
four();
three();
two();
one();
zero();
}